Coffee Machine Filters

The Omnipure Q-series head fits all Q-series filters in the omnipure range.

Replacement of the spent media bed is done quickly by detaching the filter body from a permanent head with a twist of the wrist. The new filter Cartridge is just as easily threaded into the head and the replacement is then complete.

This head unit includes 2 x 6mm or 1/4 inch John Guest fittings to connect to 6mm OD copper or plastic water pipe. If you require 10mm OD John Guest fittings please make a note requesting this on the checkout page

The Everpure 4CB5-K is a USA-made Carbon Block Filter with KDF and a 5 'm Micron Rating (Nominal), which reduces chlorine, taste, odour, and lime scale along with other offensive contaminants that can adversely affect the taste of water and beverages.

14.5" (i.e. 14 1/2 inch) High x 3.25" Diameter Cartridge that fits the QL1, QL2, QL3 Everpure heads.


Rated Capacity: 22,710 L (6,000 gallons)
Flow Rate: 1.67 GPM

NSF Certified under NSF Standard 42

Good for medium flow and water pressure areas and low volume applications.

Sanitary quick change cartridge is easy to install and replace.

The Everpure BH² Filter Cartridge provides clear, fresh, premium quality water for consistently great tasting coffee and beverages. Most commonly used in commercial coffee machines due to its large volume capacity and scale inhibitor.

Everpure Part #: EV9612-50 and replaces the older model EV9612-00

New and improved Micro-Pure II media with AgION' antimicrobial protection inhibits any potential bacterial growth.
Reduces chlorine taste and odor and other offensive contaminants that can adversely affect the taste of coffee.
Precoat submicron technology reduces dirt and particles as small as 1/2 micron in size and possible health contaminants such as asbestos fibers and Cryptosporidium and Giardia cysts.
Self contained scale inhibitor feed reduces water related equipment problems caused by scale build up from dirt and dissolved minerals.
Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination
NSF Certified under NSF/ANSI Standards 42 and 53
Capacity: 3,000 gallons (11,355 L) or 6,000 pots

For low flow, medium volume brewers

Install vertically with cartridge hanging down

Allow 2-1/2' clearance below the cartridges for easy cartridge replacement

Always flush the system by running water through new cartridges before connecting to the coffee machine

Change cartridges on a regular 6 month preventative maintenance program

Change cartridges when capacity is reached or when pressure falls below 10 psi