Frigidaire WF2CB

The WF2CB Filter replaces these older filter part numbers:

• Frigidaire

            MB100,   MB-100,   MB 100,   PureSource MB
            FC100,   FC-100,   FC 100
            MBFC2003,   MBFC-2003,   WF2MB
            NGFC2000,   NGFC-2000,   SWF2CB
            218732308,   218732309,   218732309A
            218732309B,   218732309C,   218732309D
            240396401,   240396402,   240396403
            240396404,   240396405,   240396406
            240396701,   240508034,   76080000

        

•  Electrolux

           241527301,   218732310,   EWF2CBPA
            (Electrolux refrigerators are made by Frigidaire)

• Sears / Kenmore

           46-9911,   469911,   9911,   9911P,   04609911000
           46-9916,   469916,   9916,   9916P,   04609916000

            Note: If you have a Kenmore refrigerator,
            and your fridge model number starts with 253,
            then your refrigerator was made by Frigidaire.


The WF2CB Filter removes the following impurities from your drinking water:

•      99.30% of Lead
•      91.00% of Mercury
•      99.99% of Cysts
•      98.00% of Alachlor
•      98.00% of Atrazine
•      92.00% of Lindane
•      87.50% of Toxaphene
•      96.00% of 2,4-D
•      98.50% of Chlorine
•      99.70% of Turbidity
•      98.60% of Particulates (Class III)
•      does not remove Fluoride

The WF2CB cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53

Installing your new water filter:

   1. Press the button to the right of the filter to release it
   2. Pull the old filter straight out and discard (don't worry, the water will shut off automatically)
   3. Push the new filter straight in until it "clicks" into place
   4. Reset your "change filter" light (if your fridge has one)

Resetting your "change filter" light:

•      Press and hold the reset button on the dispenser until the green light flashes (up to 15 seconds).