Samsung DA29-00003F

• Samsung

           DA29-00003G,   DA29-00003B,   DA29-00003A,   DA29-0003B
           HAFCU1,   HAFCU1/XAA,   DA61-00159,   DA61-159
           DA97-06317A,   DA29-00003,   DA29-00003A-B,   DA2900003A
           DA2900003B,   DA61-00159A,   DA61-00159A-B,   HAFIN2/EXP
           TADA29-00003A,   TADA29-00003B,   WF289, WSS-1


The DA29-00003G Aqua-Pure Plus Filter removes the following impurities from your drinking water:

•  99.30% of Lead at pH 6.5
•  99.40% of Lead at pH 8.5
•  96.60% of Mercury at pH 6.5
•  88.90% of Mercury at pH 8.5
•  99.00% of Asbestos
•  96.40% of Benzene
•  99.80% of P-Dichlorobenzene
•  99.99% of Cysts
•  98.70% of Carbofuran
•  97.60% of Chlorine
•  98.6% of Turbidity
•  98.40% of Particulates (Class I)
•  does not remove Fluoride

The DA29-00003G cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53


Installing your new water filter:

   1. Twist the old filter a quarter-turn counterclockwise
   2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
   3. Push the new filter up into the fridge until it stops
   4. Twist the filter a quarter-turn clockwise
   5. Reset your "change filter" light (if your fridge has one)

Resetting your "change filter" light:

•  Press and hold the ice type and child lock buttons (at the same time) for 3 seconds - the light should turn green.

•  Note: If you hold these buttons for 5 seconds, you'll cancel the reset process, and you'll have to do it again. If this happens, just release the buttons and start over.