Maytag UKF8001 Replacement Filter

•  Amana/Maytag recently changed their part naming and numbering scheme

•  This filter was previously known as the Amana/Maytag PuriClean II UKF8001AXX

The UKF8001 Filter replaces these older filter part numbers:

•  Amana / Maytag

UKF8001AXX,  UKF8001AXX-750, UKF8001,  8001P,   UKF8001AXXP,  WF50,  OWF50,  WF51,    OWF51,   WF50-NI300,   OWF50-NI300,   WF50-KNI300,    WF50-NI500,  OWF50-WI500
WF50-WI500,   WF50-KWI50067002269,   67002671,   67003523,   67003526,   67003527   67003528,   67003591,  67003727,  67006474,   67006637,   12589201,  12589203,  12589206
12589208,   12589210

•  KitchenAid

4396395,  8171032,  8171249
            (KitchenAid bottom-freezer refrigerators are made by Amana)

•  Sears / Kenmore

46-9005,  469005,  9005,  9005P,  46-9006,  469006,  9006,  9006P,  46-9992,  469992,  9992,  9992P
469005750,   469005-750,   46-9005-750,   469006750,   469006-750,   46-9006-750
 04609005000,   04609006000


The UKF8001 Filter removes the following impurities from your drinking water:

* 99.35% of Lead               * 98.72% of Mercury                     * 99.99% of Asbestos     
* 95.71% of Benzene         * 99.76% of P-Dichlorobenzene    * 98.74% of Carbofuran
* 76.99% of Atrazine          * 98.72% of Lindane                      * 92.97% of Toxaphene
* 97.26% of Chlorine         * 97.09% of Turbidity                    * 98.68% of Particulates (Class I)
* 99.99% of Cysts               * does not remove Fluoride


The UKF8001 filter is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53



To install your new water filter:

   1. Unlatch the plastic filter cover, and let it swing down (so you can see the filter)
   2. Twist the old filter a quarter-turn counterclockwise
   3. Pull the filter straight out and discard (don't worry, the water will shut off automatically)
   4. Push the new filter into the fridge until it stops
   5. Twist the filter a quarter-turn clockwise
   6. Swing the plastic filter cover up until it snaps closed
   7. Reset your "change filter" light (if your fridge has one)

Resetting your "change filter" light:

•  Press and hold the dispenser lock and auto light buttons on the dispenser (at the same time) for 4 seconds until the filter status indicator begins to flash, then release the buttons.

      OR

•  Press the dispenser lock and water buttons for 4 seconds until the filter status indicator begins to flash, then release the buttons.