Whirlpool 4396508

The 4396508 Filter replaces these older filter part numbers:

•    Whirlpool

4396508P,  4392857,   4392857R,   4396918,   4396562,   4396563,   2200203,   2203220,    2203980   2305766,   2305767,   2305768,   2255518,   2186444,    PWF-NL240V,   PNL240V,   WF-NL240V WFNL240V,   NL240V,    WF-NL240,   WFNL240,   NL240,   WF-NL300,   WFNL300,   NL300  PWF-L400V,    PL400V,   WF-L400V,   WFL400V,   L400V,   WF-L400,   WFL400,   L400          WF-L500,   WFL500,   L500
WF-300BR (filter system that uses 4396508)

•      Kitchen Aid

4396547,   4396163,   4396509,   4396509P

•      Sears / Kenmore

           46-9902,   469902,   9902,   9902P,   0460990200,   46-9908,   469908,   9908,   9908P      04609908000
(Some Kenmore fridges are made by Whirlpool)

The 4396508 Filter removes the following impurities from your drinking water:

•  99.35% of Lead at pH 6.5
•  99.31% of Lead at pH 8.5
•  96.22% of Mercury at pH 6.5
•  91.57% of Mercury at pH 8.5
•  96.40% of Benzene
•  99.77% of P-Dichlorobenzene
•  92.50% of Carbofuran
•  92.86% of Toxaphene
•  99.00% of Chlorine
•  95.10% of Particulates (Class II)
•  Does not remove fluoride

The 4396508 cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53

Installing your new water filter:
1.    Twist the old filter a quarter-turn counterclockwise
2.    Pull the filter straight out (don’t worry, the water will shut off automatically)
3.    Remove the reusable color-keyed knob from the end
4.    Discard the old filter
5.    Slide the knob onto the end of the new filter
6.    Push the new filter into the fridge until it stops
7.    Twist the filter a quarter-turn clockwise
8.    Reset your “change filter” light (if your fridge has one)

Resetting your “change filter” light:

•  Press the light switch (the one that the refrigerator door presses every time you close the door) 5 times within 10 seconds.      or

•  If the fridge has a filter button, press and hold it for 5-10 seconds.