GE Smart Water MWF

The MWF Filter replaces these older filter part numbers:

•  GE SmartWater

           GWF,  GWFA,  GWF01,  GWF06,  MWFA

•  Hotpoint

           HWF,  HWFA

•  Sears / Kenmore

           46-9991,  469991,  9991
           46-9996,  469996,  9996


    

The MWF Filter plus a GE filter adapter can be used to replace these old metal canister filters:

•  Sears / Kenmore

           9905,  469905,  46-9905,  9905P,  04609905000

•  Water by Culligan

            FXRC,  FXRT,  MXRC,  HXRT,  WR97X10006

The MWF Filter removes the following impurities from your drinking water:

•      99.00% of Lead
•      93.00% of Mercury
•      99.00% of Asbestos
•      96.00% of Benzene
•      99.00% of P-Dichlorobenzene
•      99.99% of Cysts
•      94.00% of Atrazine
•      99.00% of Alachlor
•      98.00% of Carbofuran
•      99.00% of Lindane
•      93.00% of Toxaphene
•      98.00% of 2,4-D
•      96.00% of Chlorine
•      98.00% of Turbidity
•      99.10% of Particulates (Class I)
•      does not remove Fluoride

The MWF cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53



Installing your new water filter:

   1. Twist the old filter a half-turn counterclockwise
   2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
   3. Fill the new filter with water (you can use the cold water faucet on your kitchen sink)
   4. Push the new filter up into the fridge until it stops
   5. Twist the filter a half-turn clockwise
   6. Reset your "change filter" light (if your fridge has one)

Resetting your "change filter" light:

•      Press and hold the reset water filter button on the dispenser for 3 seconds.