Omnipure K2567

Omnipure K2567
Omnipure K2567-JJ Inline GAC & KDF Water Filter:

The KDF Medium is designed specifically for reducing chlorine and water soluble heavy metals and controls scale, bacteria and algae.

These USA made Inline Filters can be used for all external filters on all makes of fridges and will last for 1 year.

Suitable for use with the following fridges

Smeg,
Samsung,
LG,
F & P,
GE GXRTQ GXRTR,
Bosch,
Whirlpool,
Electrolux,
Maytag,
Price:
NZ$ 69.90
FF K2567 6mm
Purchase Qty:
 

The Omnipure K2567-JJ Water Filter can be used in icemakers, refrigerators, beverage equipment, drinking fountains, under the counter systems and R.O.Systems.
 
The Omnipure K2567-JJ GAC with KDF water filter is a granular activated carbon filter used to reduce chlorine taste and odour, water-soluble heavy metals, and control scale, bacteria and algae.

The K2567-JJ filter has a 1/2 pound of KDF.

  •  Dimensions: 2" W X 10" L
  •  Flow Rate: .5 GPM
  •  Maximum Pressure: 125 PSIG
  •  Maximum Temperature: 100 F
  •  Capacity: 1500 Gallons
  •  Reduces: Chlorine Taste & Odor
  •  Reduces: Scale, Bacteria and Algae
  •  Filtration Media: Granulated activated carbon with 1/2 lb. KDF
  •  Fitting Size: 6mm Quick Connect fitting factory installed



General Installation/Operation/Maintenance Requirements
Note flow direction of filter
For quick connect fittings; push scratch free tube end into the fitting until it bottoms.


As this filter is Granulated activated carbon it needs to be flushed until the water runs clear. To do this we recommend the inlet pipe is fitted to the filter and then the filter is flushed into a bucket before installing the outlet pipe. This way the fine particles of carbon are not flushed though your appliance.
Replace cartridge when rated capacity (1,500 Gal.) is reached, or when flow becomes too slow


This is the same type of filter as the Omnipure K5567-BB but is smaller in size. It is only available with the factory installed 6mm Quick Connect fittings to suit the 6mm O/D plastic or copper pipes. The white pipes showing in the photo protruding from the filter at each end are small pieces of pipe factory installed as dust stops. You must remove these pipes prior to installing this filter.