GE Smart Water MSWF

GE Smart Water MSWF
The GE SmartWater MSWF Cartridge fits GE side-by-side refrigerators (manufactured after 2007) with a round long filter, typically mounted inside the refrigerator at the rear of the compartment - above the top shelf.
RRP:
NZ$ 132.90
Price:
NZ$ 79.90
FF MSWF
Purchase Qty:
 

The MSWF Interior Refrigerator Filter is the filter replacement for the following refrigerator models:

DSF25KGWA, DSS25KSWA, ECF23KGWA, ESC23KSWA, ESF25KGWA, ESS25KSWA, GCF23KGWA,
GSC23KSWA, GSF25KGWA, GSF25LGWA, GSF25TGWA, GSL25LGWA, GSS25KSWA, GSS25LSWA,
GSS25TSWA, LSS25XSWA, PCF23MGWA, PCF23NGWA, PCF23RGWA, PCF25MGWA, PCF25PGWA,
PSC23MSWA, PSC23NSWA, PSC23PSWA, PSC25MSWA, PSC25NSWA, PSC25PSWA, PSF26MGWA,
PSF26NGWA, PSF26PGWA, PSF26RGWA, PSH23PGWA, PSH23PSWA, PSH25MGWA, PSH25MSWA,
PSH25PSWA, PSI23MGWA, PSI23NGWA, PSI23NSWA, PSS26MSWA, PSS26NSWA, PSS26PSWA,
PSW23PSWA,PSW23RSWA, PSW26MSWA, PSW26PSWA, PSW26RSWA.

The MSWF Filter removes the following impurities from your drinking water:

  • 97.00% of Chlorine
  • 99.30% of Lead at pH 6.5
  • 98.00% of Lead at pH 8.5
  • 94.00% of Mercury at pH 6.5
  • 88.40% of Mercury at pH 8.5
  • 99.99% of Cysts
  • 99.00% of Asbestos
  • 96.80% of Benzene
  • 99.70% of P-Dichlorobenzene
  • 93.90% of Atrazine
  • 98.70% of Carbofuran
  • 99.00% of Lindane
  • 92.90% of Toxaphene
  • 96.00% of 2,4-D
  • 96.50% of Turbidity
  • does not remove Fluoride


The MSWF cartridge is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53


Installing your new water filter:

   1. Twist the old filter a half-turn counterclockwise
   2. Pull the filter straight down and discard (don't worry, the water will shut off automatically)
   3. Fill the new filter with water (you can use the cold water faucet on your kitchen sink)
   4. Push the new filter up into the fridge until it stops
   5. Twist the filter a half-turn clockwise
   6. Reset your "change filter" light (if your fridge has one)

Resetting your "change filter" light:

  •      Press and hold the reset water filter button on the dispenser for 3 seconds.